GE JGBP35GXH Owner's Manual & Installation Instructions page 20

Usingthe self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work proper/)/.
@
How to Belay the Start of Cleaning
Make sure die clock shows tile correct time
of day.
Touch the SELFCLEAN pad.
[_ Using tile ÷ or - [)ads, enter tile
desired clean time.
[_ Touch die
OELAYSTART
pad. The
earliest start time you can set will
appear in the display.
_-] Using the + or - pads, enter the time
of day you want the clean cycle to start.
[_ Touch the
START
pad.
The door locks automadcNly: The display
will show die start time. It will not be
possible to open the oven door until tile
temperature drops below the lock
temperature and the LOCKEDdoor light
goes off
When the LOCKEDdoor light is off; open
the doo_:
After a Clean Cycle
You may notice some white _ksh in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spotsremain, r emove themwith a soap-
filledscouring padandrinsethoroughly w ith
a vinegar a ndwatermixture.
These deposits are usually a salt residue
dmt cannot be removed by tile clean cycle.
If die oven is not clean after one clean
cycle, repeat the cycle.
}:_You cannot set the oven for cooking undl
tile oven is cool enough for tile door
to unlock.
¼,qdle file oven is seffk:leaning, you can
touch the
TIMER/CLOCK p ad
to display
file time (£ day. To return to the dean
countdown, touch the
COOKING TIME pad.
If die racks become hard to slide,
apply a small amount of vegetable oil or
cooking oil to a paper towel and wipe
the edges of the oven racks with the
paper towel.
20