GE JKP90 Owner's Manual page 37

ge.com
z z I i
Z |
i _1/,el i 18 _ ii i
Maximum/" _ z
length _.\ ] ,,
, Bulb
,
,
Glass cover
Lower Oven Light Bulb (onsome models)
NOTE: Theglass cover (onsome models)should
be removedonly when cold Weanw /ate;(g/oves
may offer a better grip.
gefln'e replacing tile bulb, disconnect
electrical power to tile oven at tile main
fllse or drcuit breaker panel. I,et tile
bulb cool completely befi)re removing it.
For your safety, do not touch a hot bulb
with a damp cloth. ]fw)u do, tile bulb
will break.
Toremove:
Turn tile glass cover counterclockwise
1/4 tttrn 111101 tile tabs of tile glass cover
clear tile grooves of tile socket. Remove
tile bulb.
To replace:
Put in a new 40-watt appliance bulb.
Place the tabs of the glass cover into the
grooves of the socket. Turn the glass
cover clockwise 1/4 turn.
NOTE."
A 40-wattappliance bulb issmallerthana
standard 40-watthousehold b ulb.
Instaflandtightenthecoverclockwise.
Reconnect e/ectnca/ powerto theoven.
ForYnproved lightinginsidetheoven, c lean
theglasscoverfrequently usinga wetc/oth.
This shou/d be donewhentheovenis
completely c ool.
ReceD[ac e
Glass
covel
Sockel
Bulb
Lower Oven Light Bulb (onsome models)
NOTE." The glass cover (on some
models) should be removed only when
cold. Wearing latex gloves may offer
a better
grip.
CAUTION.
Before
replacing
your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel
Be sure to let tile light cover and bulb
cool completely:
For )our salblT, do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[] Turn tile glass co_er
counterclockwise 1/4 turn tmtil the
tabs of the glass cover clear the
grooxes of tile socket.
[] Using gloves or a (h 3 cloth, remoxe
tile bulb b) pulling it straight out.
Toreplace:
[] Use a new 130-volt halogen bulb,
not to exceed 50 watts.
Using gloves or a
[] ., , , (h T cloth, remove
tile bulb fl'om its I)acka°ing_, . Do not
touch the bulb with bare fin *et_
! ii¸¸i i i
Recept#gle
>
Usegl0ves
orcloth
[] Push tile bulb straight into tile
receptacle all the way:
[] Place the tabs of the glass coxer into
tile grooxes of tile socket. Turn tile
glass cover clockwise 1/4 turn.
For improved lighting inside
tile oven, clean tile glass cover
fl'equently using a wet cloth. This
should be done when the oven is
completely cool.
[] P.econnect electrical power to
tile
oxen.
37