Brother MFC 7550MC Setup Manual page 30

SOFTWARE SETTINGS
FOR YOUR INFORMATION
When You Wish to Change the Stored One-Touch and Speed-Dial
N.umbers (During Step 6 on Page 3-6, 8) .........
When you access the function for a One-Touch key or Speed-Dial number,
that is already in use, you will be asked if you wish to change it or to exit
and select a different One-Touch or Speed-Dial number. This display does
not appear if the One-Touch key or Speed-Dial number you chose is not
assigned.
1. Press 1 to assign a new number to the One-Touch key or Speed-Dial
number, or press 2 to choose a different One-Touch key or Speed-Dial
number.
2. If you are replacing an existing number with a new one, the old number
and name will appear in the display. Press Clear to erase the old number
and name. Then, enter the new number and name and press Set to store
the entry.
Memory Storage/Temporary Battery Back Up
Your machine is equipped with an internal battery that will keep the date
and time information for up to two hours after power has been cut off. After
that time, the date and time will be lost and you will have to reenter the
information. All other settings in the SETAUTO DIAL, USER OPTIONS
and SETUP SYSTEM functions (See the Operations Manual page 2-3~6)
are stored permanently and will be retained even in the event of a power
failure. However, the data stored in the memory during Out-of-Paper
Reception and Memory Transmission will be lost when the power is
disconnected.
II IIIIII I I I I
3.10