Advertisement
DANGER
Bubbles indicate a leak. In that case, call your LP dealer or fire department
immediately.
TRANSPORTATION
AND STORAGE
1.
Place dust cap on cylinder
valve outlet
whenever
the cylinder
is not in use.
Only install the type of dust cap on the cylinder
valve outlet
that
is provided
with the cylinder
of Propane
Valve.
Other types of caps
or plugs
lrlay result
in leakage.
2.
Always
transport
in an upright
position.
Dust Cap
3.
Do not smoke
when transporting
your cylinder.
4.
Keep cylinders
out of direct sunlight
and away frolrl sources
of heat.
/J
/"
Regulator
and LP Cylinder
Connections
CAUTION
The gas pressure
regulator
provided
with this outdoor
cooking
appliance
must be used.
This regulator
is
set for an outlet
pressure
of 11 inches water colulrm.
Replacement
pressure
regulators
and hose
assemblies
must be those specified
in the parts list.
Your regulator
is equipped
with a Q.C.C.
Type
1 quick connect
system.
It will not allow gas to flow until a
positive
seal has been made.
It has a thermal
elemelrt
that will shut offthe
gas flow if the temperature
reaches
240 degrees
F (115 degrees
C). It also has a flow-limiting
device
that will restrict
the flow of gas to 10 cubic
feet per hour (0.28 cubic
meters per hour).
TO CONNECT
THE
CYLINDER
TO THE
REGULATOR
AND HOSE
1.
Be sure the LP cylinder
is "OFF"
by turning
the hand wheel
clockwise
until it stops.
2.
Place the cylinder
into the base cabinet
shelf of the grill with the valve
facing
outward
and secure with the cylinder
support
ring.
3.
Be sure all burner
controls
are turned
to the "Of'if' position.
4.
Relnove
the safety cap from the f?Oln the cylinder
valve.
5.
Center
the nipple
of the regulator
into the cylinder
valve
6.
Turn the black nut clockwise
until it stops.
Hand
Tighten
Only.
Do Not Use A Wrench.
19
Advertisement
