Mod (Modulation) Module - Zoom BFX-708 Operation Manual

Bass effects processor
Table of Contents

Advertisement

the instrument sound. When set to "oF", ZNR is disabled.
ZNR operates independently of the EQ module. The ZNR
NOTE
setting will be active also if the EQ module is off, and the EQ
module and ZNR can also be used together.
(EQ page 1)
EQ P1
This page of the 4-band equalizer allows adjustment from the
high range to the midrange.
Parameter 1
HIGH
Controls boost/cut in high range.
MOD ( modulation) module
This module comprises spatial effects such as chorus and flanger, filter effects such as auto wah, and modulation effects such as ring
modulator.
CHORUS
TYPE 1
This stereo chorus effect produces a clear and very wide sound
stage.
Parameter 1
DEPTH
Adjusts effect depth.
Parameter 2
RATE
Adjusts modulation speed.
Parameter 3
MIX
Adjusts effect mix ratio.
V-CHO (Vintage Chorus)
TYPE 2
This chorus effect is characterized by warm and smooth sound.
Parameter 1
DEPTH
Parameter 2
RATE
Parameter 3
MIX
FLANGE (Flanger)
TYPE 3
This effect produces a unique, undulating sound.
Parameter 1
DEPTH
Adjusts effect depth.
Parameter 2
RATE
Parameter 3
FB
Adjusts feedback level. Increasing this value in the plus or minus
direction emphasizes the distinctiveness of sound, but with
different tonal character.
PHASE
TYPE 4
This effect results in a swooshing sound.
Parameter 1
POSI
Selects connection order of COMP•DIST module and MOD
module, as follows.
COMP•DIST
MOD
AF:
MOD
COMP•DIST
bF:
Parameter 2
RATE
Parameter 3
COLOR
Selects phase sound type.
TREMOL (Tremolo)
TYPE 5
This effect periodically varies the level of the sound.
Parameter 1
DEPTH
Parameter 2
RATE`
Parameter 3
CLIP
Adjusts modulation waveform clip. Larger values result in more
intense modulation.
CHO/O (Chorus/Octave)
TYPE 6
This is a combined octave and chorus effect.
Parameter 1
CHODEP
Adjusts chorus effect depth.
Parameter 2
CHOMIX`
Adjusts chorus effect mix.
Parameter 3
OCTMIX
Adjusts octave effect mix.
AWAH/O (Auto Wah/Octave)
TYPE 7
This combines an auto-wah effect with an octave effect. Should
be used with single notes.
18
-12 – 12
0 – 10
1 – 30
0 – 30
0 – 10
1 – 30
0 – 30
0 – 10
1 – 30
-10 – 10
AF, bF
1 – 30
1 – 4
0 – 10
1 – 30
0 – 10
0 – 10
0 – 30
0 – 30
Parameter 2
HI-MID
Controls boost/cut in mid/high range.
Parameter 3
LO-MID
Controls boost/cut in mid/low range.
(EQ page 2)
EQ P2
This page of the 4-band equalizer allows adjustment in the low
range.
Parameter 1
LOW
Controls boost/cut in low range.
Parameter 2
LEVEL
Adjusts volume level after passing EQ module.
Parameter 1
POSI/C
Controls DIST module and MOD module connection order and
wah tone.
AF: Module connection order is COMP•DIST
Results in fat-sounding wah.
Ar: Module connection order is COMP•DIST
Results in colorful wah.
bF: Module connection order is MOD
Results in fat-sounding wah.
br: Module connection order is MOD
Results in colorful wah.
Parameter 2
SENS
Adjusts sensitivity of wah effect. Negative values result in
downward wah.
Parameter 3
OCTMIX
Adjusts octave effect mix.
PWAH/O (Pedal Wah/Octave)
TYPE 8
Combines a pedal wah effect with an octave effect. Should be
used with single notes.
Parameter 1
POSI/C
Controls DIST module and MOD module connection order and
wah tone.
Parameter 2
FREQ
Adjusts wah effect center frequency.
Parameter 3
OCTMIX
The octave effect in effect types 6 - 8 detects the pitch of the
NOTE
input sound to the BFX-708 sound and creates a one- octave
lower component.
STEP
TYPE 9
This is a special effect with step-like filter characteristics.
Parameter 1
DEPTH
Adjusts depth.
Parameter 2
RATE
Parameter 3
RESO
Adjusts effect intensity.
PITCH (Pitch Shifter)
TYPE 10
This is a pitch shifter with a range of 1 octave up and 2 octaves
down.
Parameter 1
PITCH
Sets the pitch shift amount. The "dt" setting results in a detune
effect.
Parameter 2
TONE
Adjusts effect tone.
Parameter 3
BAL
Adjusts balance between effect sound and direct sound. Higher
values emphasize effect sound.
P-PIT (Pedal Pitch)
TYPE 11
This effect lets you vary the pitch in real time, using the
expression pedal.
Parameter 1
TYPE
Selects the pedal pitch type. Depending on the type, the pitch
when pushing the pedal down or when raising it differs.
-12 – 12
-12 – 12
-12 – 12
1 – 8
AF, Ar, bF, br
MOD.
MOD.
COMP•DIST.
COMP•DIST.
-10 – -1, 1 – 10
0 – 30
AF, Ar, bF, br
1 – 10
0 – 30
0 – 10
1 – 30
0 – 10
-12, ...- 1, dt, 1,... 12, 24
0 – 10
0 – 30
1 – 16
ZOOM BFX-708

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents