Creating A Profile That Uses A Network Folder (Smb) - Sharp e-Copy ShareScan Installation & Setup Instructions Manual

Creating a profile that uses a network folder (SMB)

If you are using a shared network folder for storage of scanned image files, you specify the path to
the target folder in a profile. You use the Sharp Network Scanner Tool to create the profile. The
user selects the profile at the device.
To create a profile:
Run the Network Scanner Tool (
1
2 On the Profiles
In the
3 Properties for Profile
name and descriptive information, such as:
4 Select the Move File to Folder
then click
OK
Click to return to the main Network Scanner Tool screen.
5 OK
Click to save the new profile on the devices specified on the Scanners tab, and then click
6 Apply
.
Close
7 Click OK to quit the program.
Start > Programs > Sharpdesk > Network Scanner Tool
tab, click New .
dialog box, specify the profile information, including the profile
check box and then click
.
eCopy ShareScan OP Installation and Setup Guide | 29
Scan to shared folder for eCopy
Details . Select the target folder and
).
.