Configuring A Connector - Sharp e-Copy ShareScan Installation & Setup Instructions Manual

Configuring a connector

This section describes the basic process of configuring a connector. To complete the installation
and setup process, you may want to configure Scan to Printer, which has fewer settings to
configure than other connectors. Refer to the Configuration Guide or the online Help for detailed
information about configuring each connector.
To configure a connector:
In the console tree, click
1
2 Double-click the connector that you want to configure.
Specify the connector's settings.
3
4 Click Save to save the settings in a connector profile. Leave "default" as the name and then
click .
Save
.
Connectors
eCopy ShareScan OP Installation and Setup Guide | 23