System Connections - Sharp HT-SL70 Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
Subwoofer
Wall socket
AC 120 V ~ 60 Hz
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Speaker connection
Connect the wire without insulation tube to the minus (–)
terminal, and the wire with red and white insulation tube to
the plus (+) terminal.
Caution:
●
Use speaker with an impedance of 3 ohms or more, as
lower impedance speaker can damage the unit.
Right
R
White
Red
●
Do not make a mistake when
connecting
speakers. The right speaker is the
one on the right side when you face
the unit.
●
Do not let the bare speaker wires
touch each other.
●
Do not allow any objects to fall into or
to be placed in the bass reflex duct.
●
Do not stand or sit on the subwoofer/sound bar. You
may be injured.
E-10
Left
L
the right and left
Sound Bar
INCORRECT