Configuration 2 Menu - Philips BDL4771V User Manual

User Manual BDL4771V
4.2.5.

Configuration 2 MENU

OSD turn off
Set the period of time the OSD menu stays on the screen (from 5 to 120 seconds since the last key stroke)
Use PLUS/MINUS to adjust.
OSD mode
Select the orientation of the OSD according to the orientation the display is installed.
Use the PLUS/MINUS button to toggle between
• Portrait
Information OSD
Set the period of time the information OSD stays on the screen. The information OSD will display when
input signal is changed.
Use the UP/DOWN button to adjust. The information OSD will not appear when Off is selected. If 0 is
selected, the information OSD will remain on the screen.
Sleep timer
Set the display to turn itself off to standby mode within a user-specified amount of time. (Off-24 hours from
current time)
Use the UP/DOWN button to adjust.
Note: When the Sleep timer is activated, Schedule settings will be disabled.
OSD H position
Adjust the horizontal position of the OSD menu.
Use the UP/DOWN button to adjust.
OSD V position
Adjust the vertical position of the OSD menu.
Use the UP/DOWN button to adjust.
Monitor information
Shows the information about your display including model name, serial no., hours of operation, firmware
version and MCU version being used.
Press the PLUS button to view the information. Press the EXIT button to return to the previous menu.
• Landscape
RETURN TO THE CONTENTS