Philips BDL4651VH/00 User Manual
Philips lcd monitor bdl4651vh 117 cm (46") multimedia full hd
Hide thumbs
Also See for BDL4651VH/00:
- Quick start manual (2 pages) ,
- Brochure (3 pages) ,
- Service manual (129 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Advertisement
Table of Contents
Related Manuals for Philips BDL4651VH/00
Summary of Contents for Philips BDL4651VH/00
- Page 1 BDL4651VH www.philips.com/welcome EN User manual Cleaning and troubleshooting...
- Page 2 • When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
- Page 3 User Manual BDL4651VH Service: • The casing cover should be opened only by qualified service personnel. • If there is any need for repair or integration, please contact your local service center. • Do not leave your display under direct sunlight. If your display does not operate normally, having followed the instructions set out in this document, please contact a technician or your local service center.
- Page 4 EQUIPMENT REGULATIONS. FCC DECLARATION OF CONFORMITY Trade Name: Philips Declaration of Conformity for Products Marked with FCC Logo, United States Only: This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 5 User Manual BDL4651VH POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computers, monitors, printers and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 Amperes (A).
- Page 6 User Manual BDL4651VH INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2.
- Page 7 User Manual BDL4651VH RoHS (Hg) (Pb) (Cd) (PBB) (Cr 6 SJ/T11363-2006 SJ/T11363-2006 (PBDE)
- Page 8 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
-
Page 9: Table Of Contents
User Manual BDL4651VH TABLE OF CONTENTS UNPACKING AND INSTALLATION 1.1. UNPACKING 1.2. PACKAGE CONTENTS 1.3. INSTALLATION NOTES 1.4. PORTRAIT MOUNTING PARTS AND FUNCTIONS 2.1. FRONT VIEW 2.2. REAR VIEW 2.3. INPUT/OUTPUT TERMINALS 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 2.4.3. - Page 10 User Manual BDL4651VH 6.4. DARK DOT DEFECTS 6.5. PROXIMITY OF PIXEL DEFECTS 6.6. PIXEL DEFECT TOLERANCES CLEANING AND TROUBLESHOOTING 7.1. CLEANING 7.2. TROUBLESHOOTING TECHNICAL SPECIFICATIONS...
-
Page 11: Unpacking And Installation
User Manual BDL4651VH UNPACKING AND INSTALLATION 1.1. UNPACKING • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. •... -
Page 12: Portrait Mounting
User Manual BDL4651VH 1.4. PORTRAIT MOUNTING Wall mounting holes Notes: • M6 (10mm) screws (with a length 10-15mm longer than the thickness of the mounting bracket) are needed for wall mounting (not included). Tighten the screws securely (recommended torque: 470 - 635N cm) •... -
Page 13: Parts And Functions
User Manual BDL4651VH PARTS AND FUNCTIONS 2.1. FRONT VIEW 1. Remote control sensor, ambient light sensor and power indicator • Receives command signals from the remote control. • Detects the ambient lighting conditions around the display. • Indicates the operating status of the unit: - lights green when the display is turned on - lights red when the display is in standby mode - blinks green when remote control signal is received... -
Page 14: Rear View
User Manual BDL4651VH 2.2. REAR VIEW 1. VIDEO SOURCE button • Use this button to select the input source. • When the On Screen Display menu is active, this is also used as the SET button. 2. MENU button • Use this button to engage the On Screen Display menu. •... -
Page 15: Input/Output Terminals
User Manual BDL4651VH 2.3. INPUT/OUTPUT TERMINALS 1. Main power switch Press to switch the main power on/off. 2. AC IN (8.0 A) Connects the supplied power cord to the wall outlet. 3. AC OUT (4.0 A) Connects to the AC IN socket of another BDL4651VH unit or an external media device. -
Page 16: Remote Control
User Manual BDL4651VH 2.4. REMOTE CONTROL 2.4.1. GENERAL FUNCTIONS POWER button Press to switch on the display from standby mode. Press again to turn it to standby mode. SMART button To select smart picture mode from: • Highbright: for moving images such as Video •... - Page 17 User Manual BDL4651VH DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. •...
-
Page 18: Inserting The Batteries In The Remote Control
User Manual BDL4651VH 2.4.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. 3. -
Page 19: Connections To External Equipment
User Manual BDL4651VH CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.2.1. USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the display. 2. -
Page 20: Using S-Video Input
User Manual BDL4651VH 3.2.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the display. 2. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the display. -
Page 21: Using Hdmi Input
User Manual BDL4651VH 3.2.4. USING HDMI INPUT Connect the HDMI connector of the external device to the HDMI input of the display. 3.3. CONNECTING A PC 3.3.1. USING VGA INPUT 1. Connect the 15-pin VGA connector of the PC to the VGA IN connector of the display. 2. -
Page 22: Using Dvi Input
User Manual BDL4651VH 3.3.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the display. 2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the display. 3.3.3. USING HDMI INPUT 1. -
Page 23: External Audio Connection
User Manual BDL4651VH 3.4. EXTERNAL AUDIO CONNECTION 3.4.1. CONNECTING EXTERNAL SPEAKERS 1. Connect the speaker wires to the external speaker (SPEAKERS) output of the display. 2. Turn on the unit. Note: Make sure your display is turned off before connecting the speaker wires. 3.4.2. -
Page 24: Connecting Another Bdl4651Vh Display
User Manual BDL4651VH 3.5. CONNECTING ANOTHER BDL4651VH DISPLAY You can interconnect multiple BDL4651VH units to create a daisy-chain configuration for applications such as a video wall. Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being used. -
Page 25: Osd Menu
User Manual BDL4651VH OSD MENU An overall view of the On-Screen Display (OSD) structure is shown below. This can be used as a reference for further adjusting your display. 4.1. NAVIGATING THE OSD MENU 4.1.1. NAVIGATING THE OSD MENU USING THE REMOTE CONTROL 1. -
Page 26: Navigating The Osd Menu Using The Display's Control Buttons
User Manual BDL4651VH 4.1.2. NAVIGATING THE OSD MENU USING THE DISPLAY’S CONTROL BUTTONS 1. Press the MENU button to display the OSD menu. 2. Press the /button to choose the item you want to adjust. 3. Press the button to enter the submenu. 4. -
Page 27: Osd Menu Overview
User Manual BDL4651VH 4.2. OSD MENU OVERVIEW 4.2.1. PICTURE MENU Brightness Note: This function is not available when Smart contrast, Light sensor or Brightness under Panel saving is turned on. Disable these functions to make Brightness accessible from the OSD menu. Adjust the overall image brightness by changing the intensity of the LCD panel’s backlight. - Page 28 User Manual BDL4651VH Color temperature Select a color temperature for the image. The image has a reddish tint with a lower color temperature, whilst a higher color temperature gives off a more bluish tint. Use the UP/DOWN button to make selection. Color control Note: This function is only available when Color temperature is set to User.
-
Page 29: Screen Menu
User Manual BDL4651VH 4.2.2. SCREEN MENU H position Note: For VGA input only. Adjust the horizontal placement of the picture. Press the PLUS button to move the image to the right, or press the MINUS button to move the image to the left. - Page 30 User Manual BDL4651VH • 21:9 - The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Note: This mode does not support deinterlacing. The screen may flicker when displaying interlaced video. Custom zoom Note: This item is only available when Zoom mode is set to Custom.
-
Page 31: Audio Menu
User Manual BDL4651VH 4.2.3. AUDIO MENU Speaker Set the display to play audio using the built-in (internal) speaker, external speakers or external audio devices (if connected). Use the UP/DOWN button to toggle between • Internal • Line-out Volume Adjust to increase or decrease the audio output level. Use the PLUS/MINUS button to adjust. -
Page 32: Pip Menu
User Manual BDL4651VH 4.2.4. PIP MENU Notes: • For Component, VGA, DVI-D and HDMI inputs only. • For Full and Normal zoom modes only. • The PIP function is turned off by default. Press the PIP ON/OFF button on the remote control to turn on PIP and make it accessible from the OSD menu. - Page 33 User Manual BDL4651VH Notes: • The PIP function is only available under certain signal source combinations as shown in the table below. Main picture signal source Video S-Video Component DVI-D HDMI Video S-Video Component picture signal source DVI-D HDMI ( : PIP function available, : PIP function unavailable) •...
-
Page 34: Configuration 1 Menu
User Manual BDL4651VH 4.2.5. CONFIGURATION 1 MENU Switch on state Set the display to turn on or remain off when the power cord is connected to a wall outlet. Use the UP/DOWN button to toggle between • Last status - The display will not be affected by the power cord connection. •... - Page 35 User Manual BDL4651VH some instances, ghost image damage can be permanent. To avoid such issues, we strongly recommend one of the following actions: • Change the picture periodically • Enable Pixel shift (See Pixel shift under Section 4.2.5.CONFIGURATION 1 MENU) •...
-
Page 36: Configuration 2 Menu
User Manual BDL4651VH 4.2.6. CONFIGURATION 2 MENU OSD turn off Set the period of time the OSD menu stays on the screen (from 5 to 120 seconds) Use the PLUS/MINUS button to adjust. OSD mode Select the orientation of the OSD according to the orientation the display is installed. Use the UP/DOWN button to toggle between •... -
Page 37: Advanced Menu
User Manual BDL4651VH 4.2.7. ADVANCED MENU Input resolution Note: For VGA input only. Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. Use the UP/DOWN button to toggle between •... - Page 38 User Manual BDL4651VH • Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input signal will be converted to progressive format for better display quality. • Interlace: Disable the IP function. This mode is suitable for displaying motion pictures, but increases the chance of image retention.
- Page 39 User Manual BDL4651VH Example: 2 x 2 screen matrix (4 displays) H monitors = 2 V monitors = 2 H monitors • H monitors - Select the number of displays on the horizontal side. • V monitors - Select the number of displays on the vertical side. •...
- Page 40 User Manual BDL4651VH This function allows you to program up to seven different scheduled time intervals for the display. You can select the time the unit turns on and turns off, the days in a week it is activated, and which input source the display will use for each scheduled activation period.
- Page 41 User Manual BDL4651VH 10. Now you have completed the schedule settings. The on-screen display should look like the illustration below: 11. Press the EXIT button and the menu will close and the schedule settings will take effect. To set up more schedule items, repeat the steps above except that a different schedule item should be selected (schedule item #2 ( Notes: •...
- Page 42 User Manual BDL4651VH • Off - Once a signal is connected, it can only be selected manually. Use the UP/DOWN button to make selection. Advanced option reset Reset all settings in the Advanced option menu. Press the PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values.
-
Page 43: Input Mode
User Manual BDL4651VH INPUT MODE VGA Resolution Active Resolution Standard Resolution H Pixels WVGA SVGA 1024 WXGA 1280 WXGA 1280 SXGA 1280 SXGA 1280 WXGA 1360 WXGA 1366 UXGA 1600 HD1080 1920 SDTV Resolution Active Resolution Standard Resolution H Pixels 480i 480p 576i... - Page 44 User Manual BDL4651VH • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected).
-
Page 45: Pixel Defect Policy
LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any LCD display with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. -
Page 46: Bright Dot Defects
6.6. PIXEL DEFECT TOLERANCES In order to qualify for repair due to pixel defects during the warranty period, a PDP/TFT panel in a Philips LCD display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 47: Cleaning And Troubleshooting
User Manual BDL4651VH CLEANING AND TROUBLESHOOTING 7.1. CLEANING Caution When Using the Display • Do not place your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of the air being expelled through the ventilation holes. - Page 48 User Manual BDL4651VH 7.2. TROUBLESHOOTING Symptom No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of 3. The selected input has no connection. 4. The display is in standby mode with Interference displayed on Caused by surrounding electrical the display or audible noise...
-
Page 49: Technical Specifications
User Manual BDL4651VH TECHNICAL SPECIFICATIONS Display Item Screen size (Active Area) Aspect ratio Number of pixels Pixel pitch Displayable colors Brightness Smart contrast Contrast ratio (typical) Viewing angle In/Out Terminals Item Speaker Output Internal Speaker Audio Output RCA Jack x 1 Audio Input RCA Jack x 2 RS232C... - Page 50 User Manual BDL4651VH Dimension [W x H x D mm] With Stand Without Stand Weight With Stand Without Stand Environmental Condition Item Operational Temperature Storage Operational Humidity Storage Operational Pressure Storage / Shipment Internal Speaker Item Type Input Impedance Output Sound Pressure Frequency Response 1060 x 660 x 405 mm 1060 x 617 x 124 mm...
- Page 51 User Manual BDL4651VH RETURN TO THE CONTENTS...