Network Menu; Configuration Menu - Philips Q Line 65BDL3511Q User Manual

Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1 2
6 7
11 12 13
16 17 18
21 22 23
Frame comp.
Turn the frame compensation function On or Off. If you
select {On}, the display will adjust the image to compensate
for the width of the display bezels in order to accurately
display the image.
Frame comp. Top
Adjust the top frame compensation.
Frame comp. Bottom
Adjust the bottom frame compensation.
Frame comp. Left
Adjust the left frame compensation.
Frame comp. Right
Adjust the right frame compensation.

6.2.5. Network menu

PICTURE DHCP
SCREEN IP address
AUDIO Netmask
TILING Gateway
Set
NETWORK
CONFIG
OPTION
2
4
3 4 5
8 9 10
14 15
19 20
24 25
Off
. . .
. . .
. . .
DHCP
Select the method to set LAN communication protocol.
{Off} - manual key-in LAN communicaton protocol by user.
{On} - auto configure LAN communicaton protocol.
NOTE: IP address, Netmask and Gateway will gray out when
DHCP is on.
IP address/Netmask/Gateway/Set
Position
Enter the IP address/Netmask/Gateway/Set.

6.2.6. Configuration menu

PICTURE
SCREEN
AUDIO
TILING
NETWORK
CONFIG
OPTION
Position
Switch on state
Select the display status when you connect the power cord
next time.
• {Power off} - The display will remain off when the power
cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the power
cord is connected to a wall outlet.
• {Last status} - The display will return to the previous
power status (on/off/standby) when removing and
replacing the power cord.
Network Control Port
Select RS232 support from
• {RS232} – RS232 come from 2.5mm Phonejack
• {LAN} – RS232 come from RJ45
• {OPS} – RS232 come OPS
NOTE:
1. OPS only for 75BDL3511Q, 86BDL3511Q
2. After connected to your OPS device, the option {OPS} is
functional.
Boot on source
Select the source when booting up.
• Input: select input source when boot up.
• USB Play List: select playlist index for USB source.
None: no playlist autoplay function depends on {OPTION}
-> {USB Autoplay}.
1~7: playlist number.
USB Autoplay: autoplay function.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}.
29
65BDL3511Q/75BDL3511Q/86BDL3511Q
Switch on State
Last status
Network Control Port RS232
Boot on source
WOL
Light Sensor
Human Sensor
Power LED light
OSD Turn Off
OSD Transparent
Information OSD 4 Sec
Logo
Monitor ID
Monitor Info
Configuration Reset
Off
Off
Off
On
15
0
On