Step
Screw (quantity)
1
M2 × 3.5 mm, wafer-head, nylon-coated (4)
When installing: When attaching the LCD panel to the cover, press the left and right edges covered with
metal gently with your fingers. Do not press the surface of the panel or apply any excessive force to the
panel. Ensure that the LCD cable connector is attached firmly.
2040 LED board
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"2010 LCD front bezel" on page 85
•
"2060 LCD cable" on page 90
Removal steps of LED board
88
Hardware Maintenance Manual
Color
Torque
0.181 Nm
Silver
(1.85 kgfcm)