When installing:
• Ensure that you attach the connectors firmly.
• Ensure that you route and tape up the cables correctly in the proper positions as shown in the following
illustration.
• When you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
1130 Base cover assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Hard disk drive or solid-state drive" on page 57
•
"1030 Memory module" on page 59
80
Hardware Maintenance Manual