EverFocus EI350 Operation Instructions Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. EI350
  6. Operation instructions manual

EverFocus EI350 Operation Instructions Manual

1/3” 560 tvl pure vision lens integrated color camera
Hide thumbs Also See for EI350:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or fire.
6.
Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
EVERFOCUS
1/3" 560 TVL Pure Vision Lens
Integrated Color Camera

Operation Instructions

Model No.
EI350

Advertisement

Table of Contents
loading

Related Manuals for EverFocus EI350

Summary of Contents for EverFocus EI350

  • Page 1: Operation Instructions

    Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the EVERFOCUS 1/3” 560 TVL Pure Vision Lens Integrated Color Camera Operation Instructions Model No. EI350...

  • Page 2: Package Contents

    camera lens. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within 0℃~50℃ (32℉ ~ 122℉) and humidity between 20%~ 80%. The input power source is 12VDC/24VAC. PREFACE The camera features a high performance, high-resolution 1/3" color CCD processor and built-in vari-focal lens, which provides excellent picture quality, flexibility and cost savings.

  • Page 3: Specifications

    SPECIFICATIONS Pickup Device Video Format Scanning System Picture Elements Horizontal Resolution Sensitivity S/N Ratio Electronic Shutter Lens Type Back Light Comp. Auto Gain Control Flickerless Auto White Balance Gamma Correction Video Output Sync. Mode Power Source Power Consumption Dimensions Weight Mounting Bracket: Operating Temperature Service Kit:...

  • Page 4: Using Special Features

    DIMENSIONS USING SPECIAL FEATURES Lens adjustment You may adjust the focus and zoom of the lens to bring the object in focus. This lens has two focal distances. The change of Tele/Wide can be done with zooming. You could switch focus between Tele/Wide, by re-adjusting focusing once again. Back Light Compensation When BLC is turned on, the AGC, ES or IRIS operating point is determined by averaging over the center area instead of entire field-of-view, so that a dimly-lit foreground object at...
  • Page 5 Back Panel 1. Auto IRIS adjustment 2. Function switcher Flickerless On/Off When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. BLC (Back Light Compensation) Normal/On When BLC is turned on, the AGC, ES and IRIS operating points are determined by averaging over the center area instead of entire field-of-view, so that a dimly-lit foreground object at center area can be clearly distinguished from brightly-lit backgrounds.
  • Page 6 LL (Line-Lock) Off/On To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on). Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on, the camera’s vertical synchronization can be driven by the AC signal in the power lines. The default setting is Off.

  • Page 7: Installation

    INSTALLATION 1. Connect the video output of the camera to a color monitor or other video device through a 75 ohm type coaxial cable with BNC female connector at camera end. 2. Plug the power cord to the outlet. Power indicator LED should light if the power source is properly connected.
  • Page 8 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Table of Contents