Set Call Monitor - EverFocus PowerPlex EDR1600 Administrator's Manual And Operating Instructions

6.17 Set Call Monitor

The Call Monitor Setup function allows the administrator to define the
regular behavior of the call monitor.
Operations:
After the Set Call Monitor item is selected, the Call Monitor Setup dialog
box will be shown on the screen.
Click on the item on the Camera List, then select the dwelling time
(1-60seconds) for the corresponding camera by using the down arrow
button. Click on the Select button to save the setting and it will be
shown on the sequence table on the right.
Click on Delete to remove the selected item from the Sequence Table,
click on Delete All to remove all settings from the Sequence Table.
Click on Default to revert the setting to default value.
Administrator' s Guide and Operating Instructions
45