Changing The Manufacturer Setting Of The Remote Control - Sharp AN-PR1000H Operation Manual

Changing the manufacturer setting of the remote control

Direct number
buttons
Notes:
Some models of Sharp's TVs and DVD players may not be operable.
As for manufacturers with 2 or more setting numbers, test them to select the right
number.
Registering the manufacturer number deletes the number previously memorised.
When replacing the batteries of the remote control, the manufacturer number may
return to default. In this case, register it again.
The manufacturer number cannot be registered depending on the TV or DVD play-
er. Even if the number can be set, some buttons may not work.
To change the TV manufacturer setting
Whilst holding down the TV ON/STAND-BY button, enter the manu-
facturer setting number (4 digits) with the direct number buttons.
Check the TV setting number to change the TV manufacturer setting (see page
38).
After setting, check it operates properly.
To change the DVD player manufacturer
setting
Whilst holding down the DVD ON/STAND-BY button, enter the manu-
facturer setting number (4 digits) with the direct number buttons.
After setting, check it operates properly.
DVD player setting number
Manufacturer name Setting number Manufacturer name
SHARP 2006(*), 2021 PIONEER
AKAI 2007
RCA
DAEWOO 2027
SAMSUNG
DENON 2010
FUNAI 2025 SANYO
HITACHI 2012 SONY
LG 2022 THOMSON
TOSHIBA
MICROSOFT 2017
VICTOR/JVC
MITSUBISHI 2023
PANASONIC 2003, 2019 YAMAHA
PHILIPS 2013 ZENITH
(*): The default manufacturer numbers are 2006 (SHARP) for DVD player.
06/3/14 AN-PR1000_EN.fm
AN-PR1000H
Setting number
2000, 2009, 2018,
2020
2008, 2011
2005
2024
2002, 2016
2015
2001
2004
2026
2014
37
TINSEA127AWZZ
1
2
3
4
5
6
7
8