Using The Radio Data System (Rds); Radio - Sharp AN-PR1000H Operation Manual

Using the Radio Data System (RDS)

AN-PR1000H
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of pro-
gramme such as sport, music, etc.
When tuned to an RDS station, "RDS" and the station name will be displayed.
"TP" (Traffic Programme) will appear on the display when the received broadcast
carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic
information is on air.
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
You can control the RDS by using the remote control only.
28
SHIFT
Information provided by RDS
Press the SHIFT button and then the RDS DISPLAY button. The display changes
as follows each time they are pressed.
SHIFT
Station name (PS)
Frequency
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
NO PS
FM 98.80 MHz
06/3/14 06/3/14 AN-PR1000_EN.fm AN-PR1000_EN.fm
Programme type (PTY)
Radio text (RT)
NO PTY
NO RT
TINSEA127AWZZ TINSEA127AWZZ