Table of Contents
Advertisement
Available languages
Available languages
About the fresh foodcompartmentshelves.
Shelf supports at various levels allow you to custom-space
your shelves. Not all features are on all models.
Half- Width Shelves
Liftupand
ITJTilt up
One
end
of the shelf
rests on a molded
side-wall
support;
a bracket
on the other
end
hooks
into a track
on the rear
cabinet
wall.
To remove, lift
the
shelf
up at flont,
then
off the
support
and
out
of the
track.
To replace, select
desired
shelf
height.
With shelf flont
raised
slightly,
hook
the
bracket's
top lug into the track,
then
lower
the shelf onto
the support.
NOTE:Theshelf to theright of the trackis
designedto hookinto the right-handslot,
the shelf to the left is designedto hook
into the left-handslot.
Full- Width Shelves
Some models have a steel wire sliding
shelf, a stationary
tempered
glass shelf or
two steel wire stationary
shelves. These
shelves can be moved to another
place
in the flesh food comparunent.
The flfll-width sliding shelf has stop-locks.
When placed correctly on the shelf
supports, the shelf will stop before coming
completely out of the refligerator
and will
not flit when you place food on it or
remove food flom it.
To removethe full-width shelves,lift the
rear of the shelf and pull forward.
Toremovea full-width shelf when the fresh
foodcompartmentdoor cannotbe opened
fully, lift the rear of the shelf, pull
forward and down, tilt the shelf and
take it otlt.
6
Advertisement
Table of Contents
