GE CTS18HBSDRWW Owner's Manual And Installation Instructions page 25

Possible Causes What To Do
Automatic icemaker
Icemaker power switch
• 0)1 power
switch models, set file power switch to file
does not work is not on. I (on) position. 011 feeler arm models, move the feeler
(onsome models) am1 to the ON (down)
position.
Water supply turned off or • See Installing the water line.
not connected.
Freezer compartment e_Vait _4 hom_ for the refligemtor to completely
too warm. cool down.
Piled up cubes in the storage • 1,evel cubes by hand.
bin cause the icemaker
to shut off.
Frequent "buzzing" sound Icemaker is on but the water • Turn the iceinaker off. On power switch models, set the
supply to the refrigerator has power switch to the 0 (off) position. On feeler arm
not been connected, models, move the feeler am1 m the
STOP(up)position.
Keeping it on will damage the water valve.
Cubes too small
Water shutoff valve connecting
• (;all the plumber
to clear the valve.
refrigerator to water line may
be clogged.
Slow ice cube freezing Door left open. • Check to see if package is hoMing door open.
Temperature control dial
• See About the temperature control dial
not set cold enough.
e
Ice cubes have Ice storage bin needs cleaning. EInpt_ and wash bin. Discard old cubes.
odor/taste
Food transmitting odor/taste
• Wrap foods well.
to ice cubes.
Interior of refrigerator • See Care and cleaning.
needs cleaning.
Moisture forms on Not unusual during • \Vipe surface (h T and reset temperature control dial
cabinet surface periods of high humidity, one setting coldeL
between the doors
Moisturecollectsinside
(in humidweather,air
carriesmoisture into
refrigeratorwhen doors
are opened)
Too frequent or too
long door openings.
Refrigerator has odor Foods transmitting • Foods with strong o(lo15 should be tightly wrapped.
odor to refrigerator. • Keep an open box of baking soda in the refrigerator;
replace every three months.
Interior needs cleaning. • See Care and cleaning.
25