Setting Up The Zapper; Direct Set-Up - One for All 1 Zapper URC-6512 Manual

Direct Set-Up

To set up the ZAPPER for your Television follow the instructions below. To
set up your Television:
1
2
3
Volume +
Volume -
4
5
6
WWW.ONEFORALL.COM

Setting Up The ZAPPER

Find your Television code in the Set-Up Code section
(page 59-68). Codes are listed by brand name. The
most popular codes are listed first.
Press and hold the MAGIC key until the POWER key
(LED) blinks twice (the POWER key (LED) will blink
once then twice).
Enter your 5-digit code according to the chart
below. The POWER key (LED) will blink twice.
= 1
= 2
Now, aim the ZAPPER at your Television and press
POWER. If your Television switches off, your ZAPPER
should be ready to operate your device.
Turn your device back on and try all the remote's functions
to ensure they are working properly. If the functions do not
work properly, repeat steps 1-5 using another code listed
under your brand.
Write the codes for your TV in the boxes provided
on page 6 and inside the battery compartment for
easy future reference.
Programme +
Programme -
= 3
= 4
5