Table of Contents
Advertisement
SECTION
PAGE
Warranty ........................................
2
Product Specifications .......................
2
Power Tool Safety ............................
3
Compound Miter Saw Safety ...............
4
Electrical Requirements and Safety ......
4-5
Accassodes and Attachments ..............
6
Tools Needed For Assembly................
6
Carton Contents ..............................
7
SECTION
PAGE
Know Your Miter Saw ........
8
Glossary of Terms ............................
9
Assembly and Adjustments.................
10
Operation.......................................
17
Maintenance ...................................
24
Troubleshooting Guide.......................
25
Parts List.........................................
26
FULL ONE YEAR WARRANTY
If this tool fails due to a defect in material or workmanship within one year of date of purchase, Sears will
at its option repair or replace it free of charge.
Return this tool to a Sears Service Center for repair, or to place of purchase for replacement.
This warranty gives you specific legal rights, and you may also have other rights which may vary from
state to state.
Seam, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179
U A
WARNING ]
Some dust created by power sanding, sawing, grinding, dHIlinQ and other construction activities contains
chemicals known (to the State of Ca.fornie) to cause cancer, bnrth defects or other reproductive harm. Some
examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks, cement and other masonry products
•
Arsenic and chromium from chemically treated lumber
Your Hak from these exposures varies depending on how often you do this type of work. To reduce your
exposure to these chemicals
work in a well ventilated area and work with approved safety aquipmantsuch
as dust
masks that are specially des gned to fi tar out microscop c part c es.
MOTOR
Pov_r Source .....................
Horsepower . .......................
Speed.................................
Brake .................................
DoubleInsulated ....................
MITER SAW
Cutting Capacity:
Crosscut ............................
Miter45° R.&L.....................
Bevel45=L........................
45° Miterand 45° Bevel . ........
120VAC,
60HZ, 15 Amp
3HP (Max. Developed)
4800 RPM (No load)
Electric
Yes
2-5/8"x 5-1/2"
2-5/8"x 3-1/2"
1-1/2"x 5-1/2"
1-1/2"x 3-1/2"
Rotating
Table:
Diameter ..............................
12-5/8"
Miter Detent Stops..................
0, 15, 22-1/2, 31.6,
450 R. & L.
Bevel Positive Stops...............
0, 450
Base Dimensions...................
19-7/8" x 16-3/8"
Dust Collection......................
Yes
Extension Table .....................
Yes
Net Weight ...........................
51.25 Lbs
IA WARNONGI
To avoid electrical hazards, fire hazards or damage to the tool, use proper circuit protection.
This tool Is wired st the factory for 110-120 Volt operation. It must be connected to a 110-120 Volt 1 15 Ampere time
delay fuse or circuit breaker. To avoid shock or firs, replace power cord Immediately
if it is worn, cut or damaged
in any way.
Before using your tool, it is cdtlcal that you read and understand these safety rules. Failure to follow these rules
could result in serious injury to you or damage to the tool.
2
Hide quick links:
Advertisement
Table of Contents
