Accessories And Attachments; Tools Needed; Carton Contents; Table Of Loose Parts - Craftsman 137.218300 Operator's Manual

RECOMMENDED ACCESSORIES
UNPACKING AND CHECKING CONTENTS
Visit your Sears Hardware Department or see the
Craftsman Power and Hand Tools Catalog to purchase
recommended accessories for this power tool.
Separate all parts from packing materials. Check each part
with the illustration on the next page and the "Table of
Loose Parts" to make certain all items are accounted for,
before discarding any packing material.
To avoid the risk of personal injury:
• Do not use a dado with a diameter larger than 8".
• Maximum dado width is 13/16". DO NOT USE WIDER
COMBINATIONS.
• Do not use molding head set with this saw.
• Do not modify this power tool or use accessories not
recommended by Sears.
TOOLS NEEDED
Medium screwdriver
#2 Phillips screwdriver
Adjustable wrench
Straight edge
4mm Hex wrench
Combination square
5mm Hex wrench
If any part is missing or damaged, do not attempt to
assemble the table saw, plug in the power cord, or turn the
switch ON until the missing or damaged part is obtained
and is installed correctly.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
A. Table saw assembly 1
B. Rear table extension 1
C. Rear table extension tube 2
D. Location seat 4
E. Blade guard and splitter 1
F. Rubber Pad & screw 1 each
G. Rip fence 1
H. Dado table insert 1
I. Miter gauge 1
J. Push stick 1
K. Blade wrench 1
L. Push stick storage 1
M. Blade 1
N. Knob & flat washer 1 each
O. Handwheel handle 1
P. Hex. wrenches 2
Q. Washers 4
R,
STAND
Stand assembly 1
Hex head bolts & flat washers 4
17mm Hex wrench
NOTE: To make assembly easier, keep contents of box together.
Apply a coat of automobile wax to the table. Wipe all parts
thoroughly with a clean dry cloth. This will reduce friction when
pushing the workpiece.