Craftsman EZ 917.272130 Owner's Manual page 11

A_.CAUTION: Do not remove discharge
guard from mower. Raise and hold guard"
when attaching mulcher plate and allow it
to rest on plate while in operation.
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional
grass catcher accessory.
NOTE: It is not necessary to change
blades. The mulcher blades are designed
for discharging and bagging also.
v"CRECKLIST
Please review the following checklist:
,# All assembly instructions have been
completed.
,/No remaining loose parts in carton.
,/Battery is properly prepared and
charged. (Minimum 1 hour at 6 amps).
4" Seat is adjusted comfortably and tight-
ened securely.
•/" All tires are properly inflated. (For ship-
ping purposes, the tires were overinflat-
ed at the factory).
,! Be sure mower deck is properly leveled
side-to-side/front-t,_-'ear for best cutting
results. (Tires munt )e properly inflated
for leveling).:
,,/Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
/ Check wiring. See that all connections
are still secure and wires are properly
clamped.
While learning how to use your tractor,
pay extra attention to the following impor-
tant items:
,I Engine oil is at proper level.
,/Fue_ tank is [illed with fresh, clean, regu.
lar unleaded gasoline.
/ Become familiar with all controls - their
location and,function. Operate them
before you start the engine.
/ Be sure brake system is in safe operat-
ing condition.
11