Table of Contents
Advertisement
4 Pan _the camera in _the direction
shown by _the arrow.
Shooting
ends au_tomatically when _the progress bar is
full and _thepanorama is
complete.
Shooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120°.
120
Progress bor
(J>Panoramasarecreated from multiple frames. The camera may in some casesrecord
an greater or lesserangle than selected or be unable to stitch the frames together
perfectly. Tile last part of tile panorama may not be recorded if shooting ends be-
fore the panorama is complete.
<J:> Shooting may be interrupted if the camera is panned too quickly or too slowly. Pan-
ning tile camera in a direction other than that shown cancels shooting.
<J:> Tile desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as tile sky or a field of grass,subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramasmay be blurred if the subject is poorly lit.
@@ For BestResults
For best results, move tile camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in tile direction shown by tile
guides. If tile desired results are not achieved, try panning at a different speed.
Advertisement
Table of Contents
