Table of Contents
Advertisement
Ti_e _et_p Me_iu
Select ON to record GPS data to a log file on the memory
card (
40; be sure the clock is set to
the correct time and date as described
on page 16). A new log file is created when ON is selected
and once every 24 hours thereafter.
Note that the camera will continue
to update GPS data even
when off, increasing
the drain on the battery. Choose OFF to disable GPS tracking.
':!) GPS logs can be viewed
in MyFinePix Studio.
':!) See"GPS"(42)
for information
on using GPS.
':!) The indicator
lamp glows orange during
recording
GPS data even when the camera is turned
offwhile
ON is selected. Select OFF before removing
the battery or memory
card. Failure to
observe this precaution
could damage
the card.
':!) Signal strength
will be displayed
in yellow
and GPS data will not be logged
if the battery
is
low (_E_ or less), no memory
card is inserted, or the memory
card has less than 32MB free.
To resume the log, select ON after inserting
a charged
battery
or a memory
card with
more
than 32 MB free.
':!) GPS tracking
may be interrupted
during
movie recording
and playback.
Choose
the units used for GPS information
from km (m) (kilometers
and meters), mi (ft) (miles
and feet), or mi (yd) (miles and yards).
Choose
how long pictures are displayed
in the LCD monitor
after shooting.
Option
I
Description
3 SEC
JPictures are displayed
for three seconds (3 SEC) or 1.5 seconds (1 .S SEC).
--
ICo]ors may differ slightly
from those in the find
image.
ZOOM(CONTINUOUS)IPictures
are displayed
until the MENU/OKbutton
is pressed.
OFF
I Pictures are not displayed
after shooting.
_, OFF has no effect
in continuous
shooting
mode.
Advertisement
Table of Contents
