Oki OKIPAGE 14EX Service Manual page 165

Buffer overflow
Buffer overflow
Buffer overflow
Daily status
Daily status
Daily status
Daily status
data in the on-line mode.
READY ON: The data that
is not printed remains in
the buffer.
Ready flashing: The printer
is receiving data or in
printing process.
emulate: AUTO, PCL,
PPR, FX, HEX
The receive buffer is
overflowing.
The page buffer is
overflowing because it
received too much data for
printing on the page.
Macro buffer is
overflowing.
The DLL buffer is
overflowing.
The printer overrun
because the print data is
too complicated to be
printed.
The printer is in the off-line
mode. The second line
indicates the emulation.
emulate: AUTO, PCL,
PPR, FX, HEX
The printer is processing
data.
The printer is printing a
page.
The printer is processing
- Press the operator panel
RECOVER key on the operator panel
to release the error display.
- Change the setting of the host or
printer so that the host can detect the
busy status of the printer. Resend
the data from the host to the printer.
- Replace the interface cable or main
control board.
- Press the RECOVER key to release
the error display.
- Install additional optional RAM
board or reduce the print data.
- Press the RECOVER key on the
operator panel to release the error
display.
- Simplify page data formatting.
Normal operation.
Normal operation.
Normal operation.
Normal operation.