Oki OKIPAGE 14EX Service Manual page 142

Service Manual for OKIPAGE 14ex
4.1.2 System Maintenance Mode
This mode is used only by maintenance personnel and it should not be released to the end-users.
To enter into the system maintenance mode, turn the POWER switch on while holding the Recover key down.
Function
There are six functions as follows:
l
Page count display
l
Loop test
l
Page count printing enable/disable
l
EEPROM reset
l
Rolling ASCII continues printing
l
SIDM enable/ disable
l
DRAM Memory Check mode
Detailed descriptions of these functions are provided in Appendix D, DIAGNOSTICS TEST.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Chapter 4 Adjustments
Page: 54