Craftsman 536.773520 Operating Instructions Manual page 10

OPERATION
HOW TO USE THE
TRIMMER HEAD DRIVE LEVER
1.
2.
To engage the trimmer head, hold the con-
trol bail against the handle. Move the
trimmer head drive lever forward to en-
gage the trimmer head. See Figure 6. The
faster the engine runs, the fester the trim-
mer head will rotate.
Once the trimmer head is rotating, push
the trimmerforward to trim.
HOW TO USE THE
THROTTLE CONTROL
1. During normal use, set the throttle con-
trol lever in the FAST position to run the
engine at full speed.
2,
Pull the throttle control lever back to de-
crease engine speed. Push the throttle
control lever forward to increase engine
speed.
3. To stop the engine, pull the throttle con-
trol lever completely back to the STOP
position.
Throttle Control
Lever
Figure 7
HOW TO USE
THE PRIMER BUTTON
1. Push the primer button five times. See
Figure 8 for location. Wait approximately
two seconds between each push.
NOTE: Do not use the primer button to re-
start a warm engine after a short shutdown.
712344 10