Check Tire Pressure; Check Deck Levelness; Check For Proper Position Of All Belts; Checklist - Craftsman 917.275010 Owner's Manual

CHECK TIRE PRESSURE
The tires on your tractor were ovednflated
at the factory for shipping purposes.
Correct tire pressure is imp_tant for host
cutting performance.
• Reduce tire pressure to PSI shown in
_PRODUCT SPECIFICATIONS" section
of this manual.
CHECK DECK LEVELNESS
For host cutting results, mower housing
should be propedy leveled. See =TO
LEVEL MOWER HOUSING" in the
Service and Adjustments section of this
manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for
replacing motion and mower blade ddve
belts in the Service and Adjustments
section ofthis manuel. Vedfythat the
belts are routed correctly.
CHECK BRAKE SYSTEM
After you leam how to operate your
tractor, check to see that the brake is
propedy adjusted. See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this manual.
V" CHECKLIST
Before you operate and enjoy your new
tractor,we wish to assure that you receive
the host performance and satisfaction
from thisQuality Product.
Please review the following checklist:
,/All assembly instructionshave been
completed.
,/No remaining loose parts in carton.
,/Battery is propedy prepared and
charged. (Minimum 1 hour at 6 amps).
,/Seat is adjusted comfortably and
tightened securely.
vAIl tires are properly inflated. (For
shipping purposes, the tires were
ovednflated at the factory).
v"Be sure mower deck is propedy leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be propedy inflated
for leveling).
,/Check mower and ddve belts. Be sure
they are routed propedy around pulleys
and inside all belt keepers.
,/Check widng. See that all connections
are still secure and wires are prepedy
clamped.
While leaming how to use your tractor,
pay extra attention to the following
important items:
,/Engine oil is at proper level.
,/Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,,/Become familiar with all controls - their
location and function. Operate them
before you start the engine.
,/Be sure brake system is in safe
operating condition.
11