Maintenance Schedule; General Recommendations; Before Each Use; Lubrication Chart - Craftsman 917.275010 Owner's Manual

MAINTENANCE SCHEDULE
FILL IN DA_-S
AS yOLI CCMPLETE
P_EG_J LAR SERVtCE _ERVICE DATES
Ched_ B ake O_a_c_ I/' V'
C_eck _re P_sssu_ V' V"
Check Ope_ato_ PmsePo_ and
T In_oc_ sy,,_r,_ V'
R ChQckro_ LOO_ Fa_,_ I,/ V', I/
ShamerVRspi_ceMower BJades 1/4
T kubacati= Cha,1 IV _ V'
O check B,_tV,_y L,_,_
R aean Battery and Terminals If V j
Check TraPs,axle COOling
Adjust B_ade BetKs } Te_._on t,/5
Adju_ Motic_ Dnve Be_t(s) Tl_sio_ I_s
Check Engirm Oql Lev_ I_ If
c_ange E ngi_al t_,=._ t/
E Qe_n Air Filler I_ 2
N Qean A_r Screen I_'_
G Inspe_ I_en_lspa_k ,_e_te_
I_ R_I_* C_I FiR_ (I f _uipl_d ) _,=
E Clean Er:gir_ COOling Fins It_a
Replace Fue_Fille_ IV/
GENERAL RECOMMENDATIONS
The warranty on this tractordoes not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractoras ins_zucted in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustmentssection of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and beltsfor wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine ran better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
s. Not r,,_*d # equ_pped web mllnt_encl.freo bl _t,.*_.
7 1191_tenfro_t •X_ p;,,ot bo_t to 35 h..t_s m,x_mum.
Oo not ove_lghte_.
LUBRICATION CHART
® Tie RodBallJoints
Spindle
Zerk Zerk
_Front Wheel
Bearing
Zerk
_)Steedr_
Gear
Teeth
_CheckJ
_earingZed_
Transaxle
Fluid
SAE30 or 10w30motoroil
_) General purposeGrease
(_ Referto Maintenance"ENGINE"Section
® Spraysiliconelubriant (MoveBootsto
Lubricate)
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricantswill attract
dust and dirt that will shorten the life of
the self-lubricatingbeadngs. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubdcant
18sparingly'