To Roll Tractor Off Skid; Check Tire Pressure; Check Deck Levelness; Check Brake System - Craftsman 917.25081 Operator's Manual

TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
1. Raise attachment liftlever to itshighest
position.
2. Release parking brake by depressing
clutch/brake pedal.
S. Place freewheel control Jn"transmission
disengaged position" (See "TO TRANS =
PORT" in the Operation section o1this
manual).
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor.
Continue with the instructionsthat follow.
CHECK TIRE PRESSURE
The tires on yourtractor were overlnflatedat
the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance.
• Reduce tire pressure to PSI shown on
tires.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section ofthis man-
ual. Veriiy that the belts are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating
properly. See 'q'O CHECK BRAKE" in the
Service and Adjustments section of this
manual.
V(CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction from this
Quality Product.
Please review the following checklist:
V" All assembly instructions have been
completed.
J" No remaining loose parts in carton.
v/ Battery isproperly prepared and charged.
J" Seat is adjusted comfortably and tight-
ened securely.
d' All tires are properly inflated. (For ship-
ping purposes, the tires were overinflated
at the factory).
J Ensure mower deck is propedy leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be propedy inflated
for leveling).
J" Check mower and drive belts. Ensure
they are routed properly around pulleys
and inside alt belt keepers.
d" Checkwiring. Seethatall connections are
still secure andwires areproperiy clamped.
J Before driving tractor, be sure freewheel
control isin "transmission engaged" posi-
tion (see "To Transport" in the Operation
section of this manual).
While learning howto use your tractor, pay ex-
traattentiontothe following importantitems:
d" Engine oil is at proper level.
vf Fueltank isfilledwith fresh, clean, regular
unleaded gasoline.
#' Become familiar with all controls, their
location and function. Operate them
before you start the engine.
t/Ensure brake system is in safe operating
condition.
!/Ensure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).