Download Print this page

Craftsman 358.794704 Operator's Manual page 9

25cc/1.5 cu. in. 2-cycle 200 mph/430 cfm gasoline powered blower/vac

Advertisement

Available languages

Available languages

4,
Make sure air flows freely from the
SHOULDER
STRAP ATTACHMENT
elbow tube into bag. If bag is
(optional
accessory
#71-85936)
kinked, the unit will not operate
1. Pass the shoulder strap over your
properly,
head and onto your left shoulder.
2. Snap the hooks onto the retainers
(see following
illustration).
USE
VACUUM
USE
BLOWERRetainer
Retainer
Retainer
,'
I Retainer
.__ _-_r
_;
.........
KNOW YOUR BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments.
Save this manual for future reference.
MULCHING
BLADES
Your blower is equipped with mulching blades as a standard
feature. When using
the vacuum
attachment,
the mulching blades automatically
reduce debris at a
STO P
Throttle
Switch
Trigger
i
Spark
ratio of up to 16:1.
Throttle Position Lever
Elbow Tube
Upper Vacuum Tube
Lower Vacuum Tube
Lower Blower Tube
STOP SWITCH
The STOP switch is used to stop the
engine. To stop the engine, push and
hold the STOP switch in the STOP posi-
tion until the engine stops.
THROTTLE
TRIGGER
The THROTTLE TRIGGER is used to se-
lect the desired engine speed.
-9-

Advertisement

loading