Maintenance; Maintenance Schedule; General Recommendations; Lubrication Chart - Craftsman 917.291482 Owner's Manual

/ Ig
SCHEDULE
FILL IN DATES _ _o _,_ 4
AS YOU COMPLETE _O_/._?_;
R EGU LAR SERVICE /_/_/_/z_/
Check Engine Oil Level _
Change Engine Oil 1_1,2
Oil Pivot Points I_
V
V
V
V
SERVICE DATES
Inspect Spark Arrester / Muffler
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins
Replace Spark Plug
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Servicemore often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to op-
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check tines and belts for wear. A
new spark plug and clean air filter as-
sure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check tine operation.
3. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
(9 Engine
\
• Tine Control
(9 Idler Arm
(9 SAE 30 OR 10W-30 MOTOR OIL
_) Refer to Maintenance "ENGINE" section
11