Craftsman Contractor 113.29884 Owner's Manual page 10

Separate all parts from packing materials and check
each one with the illustrationand the list of Loose Parts
to make certain all items are accounted for, before
discarding any packing matedaL
j WARNING: If any parts am missing, do not at-
tempt to assemble the table saw or plug in the
power cord or turn the switch on ur_l! the missing
parts are obtained and are Installed correctly.
Remove the protective oilthat is applied to the table top
and edges of the table. Use any ordinary household
type grease and spot remover.
LIST OF LOOSE PARTS
ALL ITEMS MARKED WITH AN ASTERIC (*) HAVE
BEEN DRAWN FULL SIZE FOR EASY
IDENTIFICATION
item Part Name Qtv.
A Miter Gage Assembly 1
B Saw Guard Assembly !
C Fence Assembly
D Front Fence Guide Bar 2
E Rear Fence Guide Bar 2
F Bag of Loose Parts 2
G Owners Manual 1
H Leg 4
I End Stiffener 2
J Side Stiffener 2
K Table Extension 12 x 27 2
L Motor 1
M Fence Tape 2
L
K
: TO _h hazard, never
WARNING
8voUChes
use gasoline, naptha or smmllar highly volatile
solvent.
Apply a,coat of automobile wax to the table.
Wipe atl parts thoroughly with a clean, dry cJoth.
WARNING: For your own safety, never connect
plug to power source mJtlst u_i! all assembly
steps are complete, and you have read and under-
stand the safety and operating lnstrucUons.
B
E
• ._ ?=
G H
Bag of Loose Parts
(containing the following items)
N Belt Guard ...........
1
O Belt Guard Support ..........
1
P Support Bracket ......... 1
L,_ip . .................... 3
*R Ty "T" Pan Head Screw, 10-32 x 112 3
]0