Nortel AS 5300 Fundamentals page 53

Field
Supported Audio Codecs
Add
Add All
Remove
ptimes
Default
Restart Required
OK
Cancel
Video codec configuration
The following figure shows an example of a Video Codec Configuration dialog
box.
Copyright © 2008, Nortel Networks
- 53 -
Nortel MAS Console
Description
The following audio codecs are supported: G.711-
ULAW, G.711-ALAW, EVRC-0, and G.729A. To
enable an audio codec, from the Available list,
select an audio codec, and then click the right
arrow. Use the left arrow to remove an audio
codec.
Click Add to enable an audio codec. From the
Available list, select an audio codec, and then click
Add.
Click Add to enable all audio codecs. From the
Available list, select an audio codec, and then click
Add All.
Click Remove to disable an audio codec. From the
Enable list, select an audio codec, and then click
Remove.
Select the packet times (ptimes) to enable for each
enabled audio codec.
Select the default packet time for each enabled
audio codec.
This is a read-only field. It indicates whether a
restart of the server is required if you modify the
trusted node host name or IP address. Values are
Yes and No. Yes indicates a platform restart is
required for the configuration change to take effect.
Click OK to close the dialog box.
Click Cancel to close the dialog box without saving
changes.
Nortel Media Application Server 6.0 for AS 5300
Fundamentals
NN44470-100 01.01 Standard
Release 6.0 03 June 2008