4.
Tightenthe boltsecurelyafter securingthe handlebrace.See
Figure4.
Bell Washer
Handle
Brace
Figure4
5.
Locatethecarriagebolt, bell washerand hand knobpackedwith
yourtiller.
6.
Insertthe carriagebolt throughthe weldedbracketon the handle,
bell washer,handlebraceand intothe hand knob.See Figure4.
7.
Selectone of the threehandleheightpositions(threenotchesin
the weldedhandlebracket)and tightenthe hand knobto secure
the handlein the desiredposition.See Figure4. Returnto the
lowerhandleand tightenthe hexbolt securely.
ATTACHING
THE DEPTH STAKE
1.
Removethetwo screwsfrom the depthstakeassembly.See
Figure5.
Insertthe depthstakeassemblyintothe frameand reinstallthe
two screwsremoved earlier.Tightenthe hex bolts securely. S ee
Figure6.
Depth Stake
Assembly
/
/
Figure6
Securethe pin with theclip removed earlier.Thedepthstakecan
be placedat variouspositions.Forsetup purposesit is suggested
that the depthstakebe assembledwith the stakejust above
or levelwith the groundsurface.Forfurtherinstructionson the
DepthStakereferto the OperationSectionof this manual.
Depth Stake
Assembly
Screws
Figure5
8