Craftsman 113.298722 Owner's Manual page 35

BEVEL RaPPBNG
When bevel ripping material 6 inches or narrower, use
Fence on the right side of the blade ONLY. This will
provide more space between the Fence and the saw-
blade for use of a Push Stick. if the Fence is mounted
to the left,the Sawblade Guard may interfere with proper
use of a Push Stick.
Keep your hands out of the blade path.
J WARNING: To avoid kickback, push forward only
on the part of the workplece that wlil pass be-
_Neen the blade and the fence.
Stop your thumbs at the front edge of the table. Finish
the cut with the appropriate pusher.
Once the trailing end is on the table:
When"WIDTH OF RIP"is 2 incheswide or more, usethe
Push Stick to finish pushing the work all the way past the
blade.
When thru-sawing a rip 1/2 inch to 2 inches wide, the
Push Stick CANNOT be used because the Guard will
interfere. USE the Auxiliary FencelWork Support and
Push Block.
Attach Auxiliary Fence/Work Support to Rip Fence with
two "C" clamps.
35