Craftsman 126.32563 Operator's Manual page 20

INSTALLING OR REMOVING A BLADE
WARNING I
Only use blades which are specified for use
with this machine. Ensure that the maximum
speed of the blade is compatible with the
machine.
Only carry out this procedure with the
machine disconnected from the power
source.
NOTE: Wear protective gloves when
handling the blade during installation and
removal.
1. Ensure the cutting head is up.
2. Push the button at the front of the auxiliary
guard, and rotate the auxiliary guard to
expose the arbor bolt. (Fig. E)
(Fig. E)
3. Rotate the lower blade guard up into the
upper blade guard. (Fig. F)
(Fig. F)
4. Press the arbor lock button to lock the
arbor. (Fig. G)
(Fig. G)
20