Listening To The Radio - Denon AVR-982 Operating Instructions Manual

[]
LISTENING TO THE RADIO
1
Set the input function to "TUNER".
F _cTI_
{Main unit)
%
(Remote control unit}
Watching the display, press the BAND button to select the
desired band (AM or FM}.
_AND
{Remote co_tro_ unJtl
Press the MODE button to set the auto tuning mode.
MODE
"Auto" appears on the display.
(Remote control unit}
4
Press the TUNING UP or DOWN button.
TUNENG
(_U e\(_) Automatic searching begins,
then stops when a station is
tuned in.
{Remote contro_ unit)
If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
1
ot
zOZ
1
_®os
s'S s_
0 0 0 ', ",,
4_
2
3_
I Set the input function to "TUNER".
F _cTI_
{Main unit)
%
(Remote control unit}
Watching the display, press the BAND button to select the
desired band (AM or FM}.
_AND
(Remote control unit)
4
Press the MODE button to set the manual tuning mode.
Check that the display's "AUTO" indicator turns off.
MODE
{Remote collttol unit)
Press the TUNING UP or DOWN button to tune in the desired
station.
The frequency
changes continuously when the button is held
in.
TIJNSNG
{Remote corltrol unit)
NOTES:
• When in the auto tuning mode on the FM band, the "STEREO" indicator lights on the display when a stereo broadcast is tuned in. At open
frequencies, the noise is muted and the "TUNED" and "STEREO" indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns off.