Display Assembly - HP Dv7-2040us - Pavilion Entertainment - Core 2 Quad GHz Maintenance And Service Manual

Display assembly

NOTE: All display assemblies include a webcam, 2 microphones, and 2 wireless antenna transceivers
and cables.
Description
17.3-inch HD+ flush glass, AntiGlare display assembly, Moonlight White
17.3-inch HD+ flush glass, AntiGlare display assembly, Espresso Black
17.3-inch HD+ BrightView display assembly, Moonlight White
17.3-inch HD+ BrightView display assembly, Espresso Black
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the primary hard drive (see
6. Disconnect the wireless antenna cables from the WLAN module (see
7. Remove the switch cover and keyboard (see
8. Remove the speaker assembly (see
Remove the display assembly:
1. Disconnect the display panel cable (1) and the webcam/microphone cable (2) from the system
board.
2. Remove the WLAN antenna cables from the clips (3) built into the top cover.
Battery on page 44).
Hard drive on page
Switch cover and keyboard on page
Speaker assembly on page
Spare part number
516296-001
519260-001
516295-001
519259-001
48).
WLAN module on page
65).
Component replacement procedures
50).
59).
67