Bluetooth Module - HP Dv7-2040us - Pavilion Entertainment - Core 2 Quad GHz Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 537857-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the primary hard drive (see
6. Remove the switch cover and keyboard (see
7. Remove the speaker assembly (see
Remove the Bluetooth module:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the Bluetooth module to the computer.
2. Lift the Bluetooth module up (2) and release the Bluetooth cable from the routing channel (3).
3. Disconnect the Bluetooth cable from the system board (4).
Reverse this procedure to install the Bluetooth module.
66 Chapter 4 Removal and replacement procedures
Battery on page 44).
Hard drive on page 48
Switch cover and keyboard on page
Speaker assembly on page
Spare part number
483113-001
)
59).
65).