Setup; General Information; Print The Self-Diagnostic Test; Create And Set Up Netware Printer Objects - Oki C9600hdn Network And Configuration Manual

Printing from Novell Netware:

Setup

General Information

Follow these steps:

1. Print the Self-Diagnostic Test

2. Create and Set Up NetWare Printer Objects

3. Configure the Print Server

Print the Self-Diagnostic Test
The print server's self-diagnostic printout provides information that is
required for NetWare configuration.
To generate the printout, press the Test button on the print server for more
than three seconds and release.
The Ethernet address (MAC Address) is found under "TCP/IP Configuration"
on the first page.
The first six digits of the Ethernet address are the same for all OkiLAN print
servers. The last six digits of the Ethernet address are unique to each card.
Create and Set Up NetWare Printer Objects
Use NWAdmin32 or the Pconsole utility to create and set up NetWare
printer objects. Please refer to the Novell documentation for instructions on
how to achieve this.
Configure the Print Server
See "Section 1: Configuring the Print Server" on page 15 for instructions.
OkiLAN 8200e Network User's Guide
181