Self-Diagnostic Test - Oki C9600hdn Network And Configuration Manual

Self-Diagnostic Test

With the printer power switched on, press the print server test button for
more than three seconds and release. The self-diagnostic test results
(normally "OK") and Network Information configuration settings are
printed.
If "NG" is displayed for the self- diagnostic test instead
of "OK" see page 209.
The printout contains the following network information:
• Printer Information
• General Information
• TCP/IP Configuration
• NetWare Configuration
• EtherTalk Configuration
• NetBEUI Trap Configuration
• Email Configuration
• SNMP Trap Configuration
• IPP Configuration
• Time / SNTP Configuration
• Security
• Maintenance
NOTE
OkiLAN 8200e Network User's Guide
12