Overview Of Programming - Escort Passport 7500S TurboCharged Owner's Manual

Overview of EZ-Programming
Press the REVIEW button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
AUDIO TONES
CITY MODE SENSITIVITY
BRIGHTNESS
DARK MODE
Safety Warning System
VG2 (radar detector detector)
*
Factory Default Settings
To reset Passport to its original factory settings, press and hold the "CITY," "DIM," and "MUTE" buttons while
turning the power on. Passport's display will provide a "Reset" message, accompanied by an audible alert,
acknowledging the reset.
Pilot HWY
Pilot H
Pilot H.>
Pilot +
Pilot +.>
Pilot +>
PwrOn STD
PwrOn FST
Meter STD
Meter EXP
aMute ON
aMute OFF
Tone STD
Tone LOUD
City STD
City LoX
City NoX
Brt LAST
Brt MIN
Brt MED
Brt MAX
Brt DARK
DARK STD
DARK ALL
SWS Off
SWS On
VG2 Off
VG2 On
11
Press the CHANGE button
to change your setting
within a category
*
Full word: Highway or Auto or City
Letter: H or A or C
Letter, with scanning dot
Symbol: + or • or --
Letter, with scanning dot
Scanning symbol
*
Standard power-on sequence
Fast power-on sequence
*
Standard signal strength meter
Expert Meter
*
AutoMute on
AutoMute off
*
Standard tones
Loud tones
*
Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
*
Last brightness used
Minimum brightness when turned on
Medium brightness when turned on
Maximum brightness when turned on
Dark Mode when Passport turned on
*
Standard Dark: shows HD, AD, CD
All Dark, no display
*
SWS detection off
SWS detection on
*
VG2 detection off
VG2 detection on