Programming Menu - Escort MAX Series Owner's Manual

Operation

PROGRAMMING MENU

Overview
• To access the programming menu, press the SEN and BRT buttons.
• Press the SEN button to change the selected menu item.
• Use the - or + button to change the setting on the selected menu item.
• Press the SEN button again to return to the selected Menu item.
To exit Programming, press the Power button or simply wait a few seconds without pressing any
buttons. A "Completed" message will display, confirming your selection(s).
Restore Factory Settings
To restore MAX 360c MKII to its original factory settings, press and hold the MRK and BRT buttons while
powering on. "Factory Settings Restored" will display.
13
Operation
The following is a list of all settings available in the Preferences menu followed by detailed descriptions of
each setting.
User Mode Advanced*
Novice
Scanning*
Pilot Mode
Full Word
Arrow Mode Single*
Multiple
Band
Display Color Blue*/Green/Red/Amber
Speed Display On*
Cruise Alert 20 mph*
Off/20-160 mph
70 mph*
Over Speed
Off/20-160 mph
Over Spd Limit Off/Spd Limit*/5 Over/
7 Over/10 Over/15 Over/
20 Over/25 Over
Standard
Meter Mode
Stand FR1*
Standard FR2
Spec
Spec FR1
Spec FR2
Expert FR
Simple
Access and customize all Settings and Preferences
Access and customize Units and Display Color only, (all other
Settings are set to factory defaults)
NOTE: Switch back to Advanced Mode to view all Preferences.
Display scanning bar and the selected SEN mode
Displays only the selected SEN mode
Displays a single threat-direction arrow for the primary alert
Displays threat-direction arrows for multiple alerts
Displays color-coded threat-direction arrows for multiple alert bands
X = green, K = blue, Ka/Laser = red
Set color to match your vehicle's dash display
Displays current speed
Displays battery voltage
Offers only double beep alert tones below the speci ed speed
Alerts when the speci ed speed is exceeded
Alerts when the speci ed speed over the speed limit has
been exceeded
NOTE: only applicable when connected to a mobile Wi-Fi hotspot
Displays primary alert band with front signal strength bar graph
Displays primary alert band and signal counter with front and
rear signal strength bar graphs
Displays primary alert band and signal counter with front and
rear signal strength bar graphs
Displays primary alert band with numeric frequency and only
front signal strength bar graph
Displays primary alert band, numeric frequency and signal
counter with front and rear signal strength bar graphs
Displays primary alert band, numeric frequency and signal
counter with front and rear signal strength bar graphs for primary
and secondary alerts
Displays up to four alert bands with front and rear signal strength
bar graphs for each
Simple messages replace alert band and signal strength bar
graphs:
Caution (if traveling below Cruise Alert limit)
Slow Down (if traveling above Cruise Alert limit)
14