Table of Contents
Advertisement
How To Use Preferences
How to customize RedLine
with Preferences
There are 8 user-selectable options so
you can customize your RedLine for your
own preferences. The buttons labeled
VOLUME/MUTE and SENS are also used to
enter Preferences, REVIEW your current
program settings, and to CHANGE any
settings as desired. The words PGM, RVW,
and CHG are located next to the buttons,
and are highlighted in colored graphics.
Pages 14-16 explain each option in more
detail.
How to use Preferences
1
To enter Preferences, press and hold
both the VOLUME/MUTE and SENS
buttons down for 2 seconds. The unit will
Prefs
display the word
.
2
Then press the RVW button to review the
current settings. Simply tap the button to
change from item to item.
3
Press the CHG button to change any
setting. You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4
To leave Preferences, simply wait 8
seconds without pressing any button, or
press the PWR button ( ). The unit will
display
Complete
return to normal
operation.
An example
Here is how you would turn RedLine's
AutoMute feature off.
1
Enter Preferences by holding both the
VOLUME/MUTE and SENS buttons down for
Prefs
2 seconds. RedLine will beep display
2
Then hold the RVW button down.
RedLine will scroll through the categories,
starting with Pilot, Brightness, Alert Lamp
Alamp
PwrOn
(
), Power-on sequence (
),
Meter
Signal strength meter (
), and then
aMute
AutoMute (
).
3
Release the RVW button when RedLine
shows the AutoMute item. Since the factory
setting is for AutoMute to be on, RedLine will
display
aMute ON
.
If you accidentally don't release the RVW
button in time, and RedLine goes to the next
category, simply hold the RVW button down
again and it will scroll through all of the
categories.
4
Press the CHG button to change from
aMute ON
aMute OFF
to
.
5
To complete or exit Preferences, simply
wait 8 seconds without pressing any button,
or press the PWR button ( ). RedLine will
Complete
display
and return to normal
operation.
12
Overview of Preferences
Press the RVW button
to go fro m one category
to the next
PILOT LIGHT
(Power-on indication)
.
BRIGHTNESS
(Alert Lamp)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
*
Factory Default Settings
To reset the RedLine to its
original factory settings, press
and hold the "VOLUME/MUTE,"
and "SENS," buttons while
turning the power on. RedLine
Reset
will display a
message,
accompanied by an audible alert
acknowledging the reset.
Press the CHG button
to change your setting
within a category
* Full word: Highway or Auto or AutoNoX
Pilot HWY
Pilot H
Letter: H or A or C
Letter, with scanning dot
Pilot H.>
Vehicle voltage
Pilot V
* Automatic
Brt Auto
Minimum
Brt Min
Brt Med
Medium
Maximum
Brt Max
Full Dark
Brt Dark
ALAMP
* Alert Lamp on
Alamp ON
Alert Lamp off
Alamp OFF
* Fast power-on sequence
PwrOn FST
Standard power-on sequence
PwrOn STD
* Standard signal strength meter
Meter STD
ExpertMeter
Meter EXP
Meter SPC
SpecDisplay
* AutoMute on
aMute ON
AutoMute off
aMute OFF
VOICE
* Voices on
Voice ON
Voices off
Voice OFF
BANDS
Bands DFT
* Default settings
One or more bands disabled
Bands MOD
Turn bands ON or OFF by pressing
and holding the SENS button
X
ON
OFF
or
(default is on)
K
ON
or
OFF
(default is on)
Ka
ON
or
OFF
(default is on)
POP
ON
OFF
or
(default is off)
SWS
ON
or
OFF
(default is off)
LSR
ON
or
OFF
(default is on)
TSR
ON
OFF
or
(default is off)
13
Hide quick links:
Advertisement
Table of Contents
