W
alk-Up Functions (cont.)
Power Save Settings
Power save sets how long the printer
waits before going into standby mode.
This saves energy, but when the printer
is in standby mode it takes a few
moments to warm up when it receives a
print job or if you want to enter the
printer menu and change settings.
!
The default setting is 60 minutes.
Other available settings include 5,
15, 30 or 240 minutes; or you can
turn power save off.
Setting the Power Save
Interval
1. Press MENU repeatedly until
SYSTEM CONFIG MENU appears
on the display.
2. Press ITEM (+ or -) until
POWER SAVE DELAY TIME
appears on the display.
3. Press VALUE (+ or -) repeatedly until
the time interval you wish to select
appears on the display.
4. Press SELECT to engage the new
setting.
5. Press ON LINE to save the setting
and exit the menu.
Disabling/Enabling Power
Save
(Default = Enabled)
18
1. Press MENU repeatedly until
MAINTENANCE MENU appears on
the display.
2. Press ITEM (+ or -) repeatedly until
POWER SAVE appears on the
display.
3. Press VALUE + to toggle the setting
between ENABLE and DISABLE .
4. Press SELECT to engage the new
setting.
5 Press ON LINE to save the setting
and exit the menu.