Planning For Previous Models - HP XP P9500 User Manual

Figure 7 RAID Manager consistency group with multiple journals—3

Planning for previous models

Continuous Access Journal can be used to perform remote copy operations between P9500 and
XP24000/XP20000 Disk Array. Data can be copied from P9500 to XP24000/XP20000 Disk
Array, or vice versa.
To execute remote copy from P9500 to XP24000/XP20000 Disk Array or vice versa, set up the
following:
Configure a logical path between LDKC00 of the P9500 system and the XP24000/XP20000
Disk Array.
◦ More than one XP24000/XP20000 Disk Array can be connected to LDKC00 of P9500.
◦ LDKC01 cannot be used.
You can use the configuration instructions in this guide to set up the system. See
operations" (page 43)
Figure 8 Logical path between LDKC00 of P9500 and XP24000/XP20000 Disk Array
P9500 corresponds to one system in the above-mentioned figure. XP24000/XP20000 Disk
Array corresponds to the other system in the above-mentioned figure.
Set up the P9500 volume using a CU:LDEV number between 00:00 to EF:FF. As mentioned
above, the volume must be on LDKC00.
Up to 32, 768 volumes can be used for volume pairs.
for information.
"Configuration
Planning for previous models 31