HP XP P9500 User Manual page 16

The following provides a brief description of the pair statuses. For complete details, see
definitions" (page 67)
SMPL: A volume that is not assigned to a pair is in Simplex status, SMPL.
COPY: When copy processing is started, the primary system changes the status of the P-VOL
and S-VOL to COPY.
PAIR: When the initial copy processing is complete, the primary system changes the status of
both data volumes to PAIR.
PSUE: When a pair is suspended due to an error condition, the primary system changes the
P-VOL and S-VOL status to PSUE (if the path status is normal).
PSUS:
When a pair is split by the user (pairsplit-r), the primary or secondary system changes
◦
the status of the P-VOL and S-VOL to PSUS (if the path status is normal).
◦ If a pair is split from the secondary system, it changes the S-VOL status to PSUS. The
primary system detects the split (if path status is normal) and changes the P-VOL status to
PSUS.
16 Continuous Access Journal overview
.
"Pair status