HP Surestore 64 - Director Switch User Manual page 245

Variable Provides:
fcFxlogiFxPortIndex Port index.
fcFxlogiNxPortIndex Node port index.
FC-PHversAgrd Version of FC-PH that the F_Port has agreed to support from the fabric
login.
N_PtBBCredit Total number of buffers available for holding a class 1 connect-request,
or class 2 or class 3 frames to be transmitted to the attached N_Port. It
is for buffer-to-buffer flow control in the direction from F_Port to N_Port.
N_PtRxDFldSz Receive data field size of the attached N_Port. This is a binary value
that specifies the largest data field size for an FT_1 frame that can be
received by the N_Port. The value is in bytes ranging from 128 to 2112.
COSSuptAgrd Flag indicating that the attached N_Port has requested the F_Port for
the support of classes of services and the F_Port granted the request.
It's a bit map of classes of services.
IntrmixSptAgrd Flag indicating the attached N_Port has requested the F_Port for the
support of intermix and the F_Port has granted the request. This flag is
only valid if class 1 service is supported. If the flag is set at (no) 2, the
request is not granted; if set at (yes)1, the request is granted. The
value is always (no) 2.
StackdConnAgrd Flag indicating whether the F_Port has agreed to support stacked
connect from the fabric login. This is only meaningful if class 1 service
has been agreed upon. Always return (none) 1.
C2SeqDelAgrd Flag indicating whether the F_Port has agreed to support class 2
sequential delivery from the fabric login. This is only meaningful if class
2 service is agreed upon. If the flag is set at (no) 2, the F_Port has not
agreed; if set at (yes) 1, the F_Port has agreed.
C3SeqDelAgrd Flag indicating whether the F_Port has agreed to support class 3
sequential delivery from the fabric login. This is only meaningful if class
3 service is agreed upon. If the flag is set at (no) 2, the F_Port has not
agreed; if set at (yes) 1, the F_Port has agreed.
PortName The port name of the attached NxPort. It is the world wide name of the
attached NxPort.
ConnectedNxPort The address identifier of the destination FxPort with which this FxPort
is currently engaged in either a class 1 or loop connection. Since the
FxPort is not engaged in a connection, it is always '000000'H.
229